Posted on 8 Comments

Tatting in resin part 2

Tatting in resin, part 2.

Hello everyone!!
I was glad to receive feedback on my previous post. Thank you all for your support and interest in my blog! Please leave more comments, questions, suggestions. Because it will help me to make blog better, more useful and more interesting for you, dear subscribers!

Have you watched my video “Tatting in resin?” Welcome and liked, please!

So, today we’ll talk about molds for epoxy resin. What are the molds for epoxy? These forms made in latex, polyurethane, polysulfide and silicone. We can divide all types of molds into two large groups: purchased molds and homemade molds. Usually, it is believed that the silicone is the best material for both groups. It is believed that silicone is the most optimal material for both groups. Because Silicone mold is subject to elastic deformation, and its walls are smooth, which makes it possible to easily remove frozen products from resin. Of course, you can make your own molds from special silicone for molds and fancy objects. These products will have an unusual interesting shape. But I would advise starting with simple purchased molds until you gain enough experience.

My little trick: I sometimes use lids from plastic containers. However, you must first make a test fill to work with such “extraneous” objects. Because the final product may not be smooth, not glossy. Or, in general, it may not separate from the form, alas …

You can also make fillings in metal frames or homemade silicone fences. I tried to make a silicone heart frame, and I got … Nothing worked, because the silicone leaked overboard. 🙂 I understood my mistake and will return to the correction when there is time.

Thus, first you have to make a choice and answer the following question: What do I want to do? According to your fantasies, choose a mold! But everything is so simple, haha! I originally wanted to make a small heart 6X6 cm, but could not find a suitable size and shape of the mold. The most suitable mold for my design was about 5X5 cm. Therefore, I had to change the pattern for tatting my heart several times. The threads became thinner and thinner, the pattern became more interesting and more interesting, and in the end I got three options that I am pleased with! And which heart option do you like?

Tatting in resin, part 2

Finally, I bought suitable molds. Oh, my plans are so vast that I bought several types (it’s impossible to stop!). 🙂

Would you like to get a perfect smooth surface for the finished fill? Then, first of all, you need to prepare molds for work. How to do it? I immerse molds in soapy water (dishwashing liquid), then rinse with water under the tap. After washing, I spread the wet molds on a towel to dry. So that I do not have to wash my forms every time, I store them in a closed package. In this way, dust and debris do not contaminate the mold. And I can always get to work! Also, you can keep Molds in a closed box.

Here’s another little trick for you! I wrote a table. In this table, I drew (schematically) my molds and wrote the volume for each of them. It is very convenient, when mix the exact amount of solution for work. I usually make several different products at a time. How to measure the volume of mold? Take a syringe and clean water. You can calculate how much water enters the form if you look at the digital scale. Everything is very easy!

So, my story “Tatting in resin, part 2” turned out to be quite long. I will not abuse your patience! To be continued …
Subscribe, leave comments, ask questions. I will be glad to talk!

Welcome to my store: