Posted on Leave a comment

Cute tatting ring, final.

I shared a master class how to make a cute tatting ring in a previous post
and thank you, dear friends, for comments, subscriptions and suggestions. Your support helps me improve my blog and store!
So subscribe to my blog. Comment and ask questions. I will be happy to help with tips!

At your request, today I will tell you in detail how to stabilize the lace ring. This is my personal experience, and you can use other methods.

So our ring is woven.

Then prepare a fixing solution. It can be a mixture of PVA glue and water, a sugar solution or gelatin. I do not recommend using sugar. Products impregnated with sugar solution look attractive, of course! But these products cannot be washed – sugar is absorbed into fibers and threads can crumble from water. Believe me, I saw it with my eyes!
I do machine embroidery, so I have a lot scraps of soluble stabilizer. I take several pieces of the stabilizer, dip them in a glass bowl and pour warm water on it. The solution is ready!

After that measure the thickness of your finger ( my finger in thickness 5,5 cm). Find a template of the appropriate size. You can use the ring sizer. But I found a plastic pipe with a diameter of 5,5cm (in garage of my husband! ) . This is what I need!

Next put the ring on the pipe. Use a sponge or a piece of cotton wool to apply the solution to the threads, giving the ring a pipe shape. Soak the threads well, pat the excess solution with a dry cloth.

Leave to dry. If you need fast, use a hairdryer!

After complete drying, the ring can be removed from the pipe. Be careful, not pull the ring so as not to deform the shape. Holding the ring with your right hand, rotate the pipe. Your lace ring is ready!

And finally one more trick! You can wash the ring by putting it on this pipe. First, soak the ring with soap and water using a sponge, and then rinse the soap with warm water. You do not have to straighten out each picot, sponge and pipe will do it!

Welcome in section Patterns of my store:

And, of course, I will be glad to meet on my YouTube channel:

Leave a Reply

Your email address will not be published. Required fields are marked *